EMSI, Inc works with Adalet to offer enclosures and instrumentation. Adalet produces a wide variety of enclosures for both hazardous and nonhazardous environments. These engineered enclosure systems include explosionproof and stainless steel junction boxes, motor control enclosures, meter and instrument housings, and increased safety terminal and control enclosures suitable for NEMA type 1 through NEMA type 13 applications. Adalet markets a broad line of industrial and explosion-proof enclosure systems for a wide range of industries. Specific products manufactured by Adalet include: explosion-proof panelboards for lighting and power distribution, thermal management systems, pilot devices, high voltage cable couplers, and other related...Read More
EMSI, Inc works with Aetna Insulated Wire to offer building wire and specialty cable solutions to our customers. Aetna uses a new mold cure process to make its cables and wire resistant to ultraviolet rays, moisture, and fluid. Traditional thermoset mold processes insulate cables and wire from chemicals, provide high thermal stability and are resistant to cold flow and deformation. Aetna’s mold cure process gives the ability to extrude many types of thermosetting jackets, including CSPE, neoprene and LS0H. Additionally, Aetna’s jacketing options make their products ideal for installation in harsh environments and meet or exceed latest industry standards. Aetna’s...Read More
EMSI, Inc works with Allied Moulded Products to offer nonmetallic electrical boxes and enclosures for today's residential, commercial and industrial markets. Allied Moulded has grown to become the benchmark of quality within the electrical industry while offering a competitive price. Allied Moulded’s industrial enclosures can be found all over the world in many different control applications such as industrial & manufacturing plants, waste water treatment, wind turbines, security, SCADA, solar, marinas, data & telecommunications, mining, and more. Allied Moulded’s extensive line of NEMA type 4X/IP66 fiberglass reinforced polyester (FRP) enclosures, made with our proprietary ULTRAGUARD® resin formulation, outperform our competitors...Read More
EMSI, Inc works with Alpha Wire to provide our customers with premium wire and cable solutions. Alpha Wire specializes in products that can withstand any environmental hazard, be it temperature, oils and solvents or electrical noise. Alpha Wire product is used everywhere from factory floors to offshore oil rigs. Alpha Wire’s advanced manufacturing facilities allow them to provide the industry’s widest range and largest inventory of wire, cable and tubing products. Alpha Wire utilizes world-class logistics to provide same-day shipping in many instances. AlphaWire’s EcoCable product is the next generation of control cables. By combining better performance and minimal environmental impact,...Read More
EMSI, Inc partners with Aqua-Tronics to supply our customers with solutions to buried utilities problems. Founded in 1967, Aqua-Tronic’s sole purpose is to design and manufacture locating equipment that is field rugged and field useful. Aqua-Tronics’ products do everything from identify where cables are in the ground to detecting if current is running through a particular cable. Some of their lines can even tell one underground cable apart from another, letting you know how many different cables you are dealing with. Such products are essential for any construction team, as digging without knowing what’s underneath the earth can be a...Read More
EMSI, Inc. works with B-Line by Eaton across a breadth of product categories to offer our customers industry-leading conduit enclosures, quality support systems, anchor systems, cable trays, and more. B-line products span four of EMSI’s line card categories, making it one of the most diversified offerings within the EMSI portfolio of manufacturers. B-Line was founded in 1956 and is a division of Eaton and is headquartered in Highland, Illinois. Eaton Corporation, based in Cleveland, Ohio, acquired Cooper Industries, including B-Line, in 2012 for $11.8 B. Since it’s inception, B-Line has become a leading international manufacturer and its products have been in a...Read More
Since 1978, Bimed is a large international company specializing in: • Cable fitting elements, as plastic and metallic cable glands • Pressure balance elements, ventilation glands and ventilation plugs • Plastic connectors for the white and automotive industries • Gas springs for the automotive and furniture industries • Disposable medical products. Cable fittings are manufactured for mult-purpose applications in electrical, electronic, and the automotive industries and all their products conform to EN ISO 9001:2008 standards. Also offered are Explosion proof glands that are Atex 100 and IEC Ex, multi-function, and for both armored and non-armored cable. If you are looking for more information on Bimed, please Contact...Read More
EMSI, Inc works with Buckingham Manufacturing to provide its customers with installation and climbing equipment, specializing in arborists’ and linemens’ equipment. Buckingham is primarily concerned with the design and manufacture of climbing and work positioning equipment, fall protection gear, and accessories specifically designed for the electric, telecommunications, cable and professional arborist markets. Buckingham Manufacturers maintains their status as an industry leader in installation and climbing equipment by consistently delivering product innovations, providing their customers with the fastest delivery, offering the capability to modify products to meet the unique specifications of a customer’s request, using the best materials to produce...Read More
EMSI, Inc. works with Calbond to offer our customers a selection of PVC-coated electrical conduit, as well as fittings an accessories, necessary for the effective protection of electrical products in highly corrosive environments. Calbond manufacturers both steel and aluminum pipe for electrical installations, with use cases for classified areas, corrosive indoor/ outdoor environments, or both.  Calbond’s products meet and exceed industry standards and are particularly beneficial for companies that need increased protection against corrosion. Calbond’s product offerings include conduit pipe, junction boxes, conduit bodies along with a wide range of fittings and accessories. EMSI partners with Calbond because of its...Read More
EMSI, Inc. partners with Cantex to provide our customers industry-best offerings in PVC conduit, PVC fittings and accessories, utility ducts, spacers, and many other non-metallic electrical products. All Cantex products meet electrical industry-standards for excellence and Cantex is a proud supporter of NAED, IAEI, IEEE, ASTM, NECA, ETL and U.L. along with many other associations in the construction industry. Cantex is an important part of EMSI’s line card and has over 40 years of industry experience. As a representative of Cantex, EMSI provides our customers with the following products: Nema TC-2/TC-8 Schedule 40 & 80 PVC Conduits PVC Fittings and Accessories Utility Ducts Spacers Fittings...Read More
EMSI, Inc. works with Champion Fiberglass to provide our customers with fiberglass conduit systems, specifically for above ground, under bridge, encased in concrete, or direct burial applications.  Champion Fiberglass’ highly engineered products are manufactured to be stronger, lighter and non-corrosive while meeting the most stringent quality standards.  Champion Fiberglass conduit systems are excellent for projects requiring the versatility and performance of fiberglass conduit systems, versus other materials like PVC, aluminum, or steel. Fiberglass conduit offers exceptional corrosion resistance and will not melt or weld wire to the inside of the conduit under fault conditions. Additionally, fiberglass does not release toxic halogens...Read More
EMSI, Inc works with Colonial Wire to supply our customers with wire and cable.  Colonial Wire manufactures all of its products in the United States using IBEW employees.  Colonial Wire specalizes in non-metallic sheathed cable, underground feeder cable, and bare copper conductors type TFFN. For more information on Colonial Wire, please Contact EMSI today.Read More
EMSI, Inc works with Electroline Fittings on an array of products from steel boxes to electrical fittings for RMC,IMC, and EMT conduit. Electroline Fittings supplies a comprehensive product line that will suit all your needs. Electroline Fittings are being used in construction projects all over the world.from the Middle East to Central America to Africa. For any additional information on Electroline Fittings or its application to your business, please Contact EMSI today.Read More
EMSI, Inc works with Gardner Bender to provide our customers with electrical conduit fittings and accessories, installation and climbing equipment and wire and cable management products and accessories. Gardner Bender’s extensive line of products include electric tools, voltage testers, general wire management products, and other professional equipment. The hallmark of Gardner Bender has always been offering quality products to electrical contractors and an affordable price. Jim Gardner began the company over fifty years ago when he developed a better way to manufacture bending conduit and later expanded to a wide variety of products.  Gardner Bender utilizes a world-class global supply...Read More
EMSI, Inc works with Gibson Stainless to provide our customers with electrical conduit and cable trays as well as electrical conduit fittings and accessories.  Gibson’s stainless steel products are designed to be used with heavywall conduit, although some products will work on EMT or IMC as well. EMSI works with Gibson due to their continued commitment to product excellence.  Many of their product lines carry Underwriters Laboratories (UL) approval and meet NEMA standards.  All products are designed to meet and exceed standard electrical industry practices. Stainless steel is the perfect choice in area where corrosion is a concern, as stainless steel...Read More
EMSI, Inc works with Harger to provide our clients with grounding and lightning protection solutions.  Harger has provided its customers with superior service and product since 1960, placing an emphasis on customer satisfaction and quick response times to customer queries. Harger offers hundreds of products and has worked extensively with the wireless and telecommunications market.  Buildings such as the Sears Tower, John Hancock and Amoco Oil buildings in Chicago are protected with Harger systems. Harger continually invests in the latest and most innovative manufacturing equipment in order to manufacture products to some of the most exact specifications in the industry.  Harger’s...Read More
EMSI, Inc works with Heat Trace Products to provide our customers with instrumentation, heat trace cables, kits and accessories in industrial, commercial, and residential applications. Heat Trace Products is a world leading company in the manufacture of heat trace cables, kits, and accessories. Contrary to what its name might suggest, Heat Trace Products also produces self-regulating low temperature maintenance and freeze protection applications.   Heat Trace Products is the only company to offer both a 25- and 30-watt per foot product with a maintain temperature of 375 degrees fahrenheit (190 degrees celsius).  Heat Trace Products also sels industrial heaters for process temperature maintenance.  Commercial...Read More
EMSI, Inc works with International Metal Hose to supply our customers with electrical conduit, cable trays and electrical conduit fittings and accessories.  International Metal Hose’s products are most often used in settings such as construction, industrial facilities, wire harnesses, machine tools, instrumentation and telecom equipment. International Metal Hose has been providing excellent product and service to their customers since 1956.  In that time, the company has adapted and expanded their offerings to products for electrical, fluid-handling, electronic and telecommunications applications.  International Metal Hose manufacturers a large selection of electrical conduit products, including flexible metal tubing and hose for exhaust, material...Read More
EMSI, Inc works with Iota Engineering to provide our customers with emergency lighting and signaling as well as other lighting products.  Iota gained national recognition when it was selected by NASA in an national competition for the design and development of special high intensity fluorescent lights for use by astronauts on board SKYLAB. Iota also produces products that allow for AC/DC power converting and battery charging for a variety of voltages and amperages, as well as DC inverter ballasts for high and low wattage fluorescent applications. Please see Iota Engineering’s YouTube channel for more information about their emergency lighting and electrical...Read More
EMSI, Inc works with Lind Equipment to provide our customers with emergency lighting and signaling as well as grounding and lightning protection solutions. Lind Equipment is a leading manufacturer and supplier of portable electrical products for commercial, industrial, and hazardous work environments. Specific Lind products include portable incandescent and fluorescent hand lamps. Lind Equipment was founded more than 60 years ago and, since the beginning, has been dedicated to providing customers with safe, dependable electrical equipment that is tough enough for any sector or industry. While Lind specializes in oil/ gas, aviation, construction, chemical, and automotive industrial business applications, its...Read More
EMSI works with Marinco to offer our customers a specific selection for wire and cable management products and accessories, particularly tailored to Marinco’s specialty, which is products for harsh, marine environments. Overall, Marinco manufacturers a variety of products for markets in marine, recreational vehicles, residential and commercial generators, healthcare, mobility, and entertainment. Other products include NEMA classified amps devices, adapters, plugs, receptacles, panel mounts, flanged inlets and outlets, and CLM. While Marinco’s products aren’t for all use cases, the company is the industry leader in providing electrical and mechanical products designed for aquatic and harsh environments across a number of...Read More
The leading continuously corrugated and welded cable product of the Marmon Specialty Wire & Cable Group (including Aetna Insulated Wire and RSCC). Marmon Gardex Type Mc-HL continuously welded armor cables have been manufactured for over 50 years utilizing state-of-the-art, ISO certified facilities. From instrumentation and control to power and specialty, Marmon offers the highest quality and most complete line of Gardex continuously armored cables. For more on Marmon Gardex, please contact EMSI today.Read More
EMSI, Inc works with Meriam Process Technologies to supply our customers with measurement instrumentation solutions. Meriam specializes in multifunction calibrators, HART communicators, mechanical gauges, digital and analog pressure transmitters, manometers, pressure pumps and primary flow elements including averaging pitot tubes, orifice plates and flanges. Meriam manufactures reliable and accurate process measurement instrumentation including mechanical and electronic pressure indicators, analog and digital pressure transmitters, primary flow elements, handheld pressure, temperature and loop calibrators, handheld HART communicators, process indicators and complete flow systems. Meriam has worked extensively with companies in the automotive engineering, chemical processing, natural gas, petrochemical, water, power, waste and aviation...Read More
EMSI, Inc works with Penn Union to provide grounding and lightning protection systems to its customers.  Penn Union has engineered and produced electrical connectors all over the country in a variety of industries for 83 years. Penn Union’s aluminum and copper offerings are listed for power, grounding, bonding and direct burial.  Penn Union offers over 30,000 product variations in sizes from a few ounces to hundreds of pounds.  Penn Union takes advantage of online supply chain management to distribute products all over the country. Penn Union’s commitment to customer service has distinguished them from other manufacturers and has been the source...Read More
EMSI works with PowerPro Conduit to provide customers with a British Standard/Metric option for steel conduit and fittings.  PowerPro Conduit  offers an extensive line which includes black and galvanized pipe plain ends, black and galvanized pipe threaded with couplings. A leading brand for pipe and fittings, currently PowerPro Conduit’s products are distributed throughout Japan, Europe, Asia-Pacific, regions and the Americas.  As an American owned and operated enterprise, PowerSteel products understands the importance of meeting industry and specifications.  Products offered meet ASTM, UL, NEC, and ANSI standards. Having total control over Quality Assurance from beginning to end ensures that PowerPro Conduit will...Read More
EMSI works with Premier Conduit to provide our customers with an alternative conduit for effective cable and fiber optic management within interior raceways. Premier Plenum Duct meets UL-(910) standards for the National Electrical Code, Article 770, and satisfies UL-2024 standards for low smoke and flame propagation. Premier Corrugated HDPE is manufactured from High Density Polyethylene (HDPE) and is intended to be placed inside of existing inner duct. It’s ideal for pulls fewer than 1000 ft. and is designed to reduce surface contact when pulling cable. This lightweight product offers maximum flexibility, and allows for installation in small or restricted areas. Premier Riser...Read More
EMSI, Inc works with RSCC to provide our customers with wire and cable.  RSCC Wire and Cable designs and manufactures insulated high performance control, power, instrumentation and speciality electrical cables.  RSCC manufactures products such as armored cables, control cables, critical circuit cables, fire resistant cables, hook-up wires, high voltage wire and cable, military specification wire and cable, rig cables, sensor cables and thermocouple tray cables. RSCC has received certifications from Underwriter’s Laboratories, IEE, the Canadian Standards Association (CSA) and the Association of American Railroads (AAR). If you want more information on RSCC, you can contact us here.Read More
EMSI, Inc works with SEPCO to provide our customers with electrical conduit fittings and accessories.  SEPCO’s full line of products includes braided packing, mechanical seals, cut gaskets, sheet gasket material and die-formed rings.  SEPCO, based in Alabaster, AL, has a time-honored tradition of providing quality fluid sealing products to customers. SEPCO is an ISO 9001:2000 certified manufacturer and has a commitment to quality, both in its products and in the company’s commitment to customers and support.  If you are interested in finding out more about SEPCO’s full line of products, you can take a look at the products section of the manufacturer’s website or...Read More
Southwire delivers power to millions of people around the world. Our utility cable and building wire carry electricity to wherever it is needed. One in three new homes built in the United States contains wire made by Southwire.   Southwire leads the industry with innovative products that simplify installation, saving our customers time and money. Southwire has the right wire and cable solution for any commercial, residential, industrial or utility application. If Southwire does not have the solution, we’ll design it and make it to order. Watch the video below for information on the benefits of low-voltage lighting with Moonrays Low Voltage...Read More
For 35 years, STB Electrical test Equipment Inc.  has been offering Phasing Voltmeters, Ground Fault Detectors, Phase Rotation Meters and Ammeters.  All their products are US made, tested, and shipped out of Auburn, California. As safety is STB’s top priority, their staff is consistently coming up with innovative products, educating consumers, and providing customers with quick lead times, and exceptional service.  Each unit is designed to suit he user’s needs with features that include durability, lightweight handling, water resistance, and linear designs. STB Products pride themselves on the following: -Advanced Technology: STB Electrical Test Equipment Inc. employees are progressive, forward thinking, and...Read More
EMSI, Inc works with Tomar Electronics to provide our customers with emergency lighting and signaling solutions.  Tomar specializes in LED, strobe, and NEOBE technology. Located in Gilbert, Arizona, Tomar is a leading US and Global provider of high quality emergency warning and optical preemption systems for customers. In business for more than 40 years, Tomar has a wealth of experience in the field and is dedicated to extreme efficiency and the highest possible reliability in LED and strobe lighting systems. To maintain its position as an industry leader, Tomar places a huge emphasis on research and development to manufacture state-of-the-art...Read More
EMSI, Inc works with Tork to provide our customers with lighting equipment and solutions.  Tork products are part of the NSi industries and are manufactured in NSi’s Mount Vernon, VT facility.  Tork has been an industry leader in the lighting equipment space for more than 85 years and also offers products in a broad range of other related fields, including electromechanical and digital time switches, signaling and alert devices, pool and spa controls, residential timers, photocontrols and occupancy sensors. As a long-held industry leader, Tork is associated with quality and performance within its space.  In the 1920′s, Tork introduced the...Read More
EMSI, Inc works with Universal Lighting Technologies to provide our customers with lighting solutions.  Universal Lighting Technologies is a global leader in the design and manufacture of high-efficiency lighting ballasts and control systems.  Universal Lighting Technologies offers a full suite of electronic and magnetic ballasts for compact fluorescent, linear fluorescent, and HiD lighting along with a comprehensive line of digital and analog dimming systems.   In 2009, Universal Lighting Technologies made several strategic acquisitions to begin offering a full range of HiD products, transformers, ignitors, capacitors, lampholders and other luminary components. EMSI works with Universal Lighting Technologies due to their commitment to...Read More
EMSI represents Utility Solutions in Africa, Caribbean (Excluding Puerto Rico), and the Middle East. Utility Solutions is a designer and manufacturer of hot line tools and products for the electrical power industry. Engineers with broad electrical distribution experience founded the company in 1990 in order to design and manufacture safe and innovative products for lineman. Utility Solutions has created an environment that attracts highly skilled personnel with expertise in materials engineering, mechanical engineering, electrical engineering, machining, production, sales, and marketing. Contact us here for more information.Read More
EMSI, Inc works with Wheatland Tube Company to provide our customers with electrical conduit and cable trays and electrical conduit fittings and accessories.  Wheatland Tube is a recognized world leader in the manufacturing of continuous weld and electric weld tubular products and produces over one million pounds of steel tubing per year in six manufacturing facilities, making them the largest steel pipe manufacturer in North America.  Their products are used in energy generation, industrial applications, the construction industry and in consumer products. Wheatland Tube Company is the largest electrical fittings manufacturer in North America and is known for a number...Read More